EPDM Porch Roof Kits

Name: EPDM Porch Roof Kits
Brand: ClassicBond
SKU: PRK
Price: 186.02 GBP
Availability: InStock

Skip to the beginning of the images gallery

Flat Roof Kits for porches where the long edge has a gutter and the other long edge a wall flashing adjoining the house wall.

Kit Size (DxW)

Trim Colour

Black

White

Anthracite Grey

In stock

£186.02 £155.02

Qty

Not sure what you need? Use the easy roof kit calculator

Delivery From £15 for all Standard Flat Roofing Materials.

Compatible Systems:

The ClassicBond One Piece EPDM system is great for large or small flat roof areas and is normally bonded on to a timber deck in one piece so no joins!
Find out more!

EPDM Porch Roof Kits

These ClassicBond EPDM Porch Roof Kits are designed for structures where the gutter is along the front edge (Width) and the back edge adjoins a house wall. Kerb Edge trims are provided for the two remaining sides (Depth). The kits are easy to install, look great and have a life expectancy of up to 50 years! EPDM rubber membranes are UV, Ozone and Infra red stable so will not crack, blister or peel.

We have put together these Porch Roof Kits to including the 1.2mm One-Piece EPDM rubber membrane, adhesives, edging trims and tools required to complete this DIY project.

Included in Kit:

1.2mm ClassicBond EPDM Membrane (Size per roof kit chosen)
Water Based Adhesive to adhere Membrane to roof deck
Contact adhesive to adhere Perimeter of roof deck to Membrane
Sure Edge Gutter for front edge
Sure Edge Kerb for both side edges
Sure Edge Corner for both front corners
Wall trim to act as flashing against your house wall
External corner Patches & Primer fo both back corners where roof meets house wall
Tools requires for DIY Installation(Rollers, Scissors & Paint Brush)
All Pins and Clips to go with Trims

WE CAN TAILOR THE KIT TO SUIT YOUR ROOF - CALL 0800 313 4486 TO DISCUSS

The Membrane size will be the same as the kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.

Buying a roof kit?
You might also need

If you’re buying for a new roof or replacing an old one, you will need to consider the following components in your roof kit...

Adhesives
Tapes
Drains
Edge Trims
Tools

Why not let the Kitbuildr do the hard work for you?

An Overview

SKU	PRK
Stock Type	Warehouse Fulfilled
Brand Name	ClassicBond

Videos

How to install a Classicbond EPDM flat Roof

Downloads

Documentation

Questions & Answers (11)

What is the Life Expectancy of EPDM Rubber Roofs?

EPDM Rubber roofs have a 50 year life expectancy.

EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.

Will my EPDM membrane have a join?

All membranes do have manufactures joins as supplied to us. Depending on the spacing of the joins and the size of the piece being cut off the roll, sometimes there is no manufacturers join in the membrane.

All EPDM membranes, whether it is Firestone, ClassicBond or SKYGUARD have these joins and they are unavoidable. However, the big advantage is that it is supplied to you in one piece as our website states, which means you don't have to do any onsite joins where workmanship could be a factor.

Does It Have To Be Dry For EPDM Roofing To Be Laid?

EPDM membranes require the substrate to be dry prior to installation so that the adhesive & primers can effectively bond the rubber to the roof deck. EPDM products will not adhere to wet or damp surfaces. It is important to bear in mind that trapped moisture within the deck may vaporise and negatively affect the performance of the membrane.

If you would like more tips on when to install your EPDM roofing, check out the video below.